Zenscroll is a vanilla JavaScript library that enables animated vertical scrolling to an element or position within your document or within a scrollable element (DIV, etc.). It can also automatically smooth all scrolling within the same page.
Features:
Mouse Wheel Accelerator improves the wheel scroll in windows towards dynamic smooth iPhone-like scrolling. Works best with applications built for smooth scrolling like browsers and image editing. Aug 27, 2018 Smooze animates your scroll and adds functionality to your non-Apple mouse (scroll-wheel mouse). Disable scroll acceleration in macOS 10.12 Sierra and select the number of lines you want to scroll on. Smooze 1.6.7 – Smooth scrolling and mouse enhancements. August 27, 2018.
Full support tested and works under:
Limited support (programmatic animated scroll in document) tested and works under:
Download Zenscroll and include it into your page. A good place is at the very bottom, just before the closing </body> tag. For example:
Zenscroll will also work if you reference it in the <head> but it is not recommended for performance reasons. Important: You can only call Zenscroll when document.body is already available, so don’t try to call Zenscroll functions from the <head>.
You can also get Zenscroll via npm:
If you want to leverage the native smooth-scrolling by the browser (currently available in Firefox 36+ and Chrome 49+) then set the scroll-behavior CSS property to smooth on the body and on the elements you want to scroll. E.g.,
If this is set, Zenscroll will use built-in smooth-scrolling in capable browsers while still animating the scroll in older browsers. However, note that if you use the native smooth-scrolling then you loose the finer control options that Zenscroll offers: the speed settings of the animation, and the edge offset for links within the page. Only set this CSS property on the body or on the elements if you don’t need this level of control.
If you want to use Zenscroll programmatically but you don’t need the automatic smoothing on local links then set window.noZensmooth to a non-falsy value. In this case the event handler for automatic smoothing is not installed but you can still use everything, like zenscroll.intoView(), etc.
It’s important to set this value before Zenscroll is executed, otherwise the handlers will be installed. So make sure the setting comes before the loading of the script. For example:
(I consider the disabling of the automatic smooth-scrolling a rather rare scenario that’s why I install the event handlers by default.)
If Zenscroll is included in your page it will automatically animate the vertical scrolling to anchors on the same page. No further setting is required. (Note that it can be disabled, see 1.5.)
Automatic smooth-scrolling works also with content you dynamically load via AJAX, as Zenscroll uses a generic click handler. Since the automatic smooth-scrolling is implemented a progressive enhancement, internal links work in older browsers as well.
Zenscroll automatically adds the configured edge offset when the page is loaded with a hash suffix. For example, if you navigate to 'http://yoursite.com/#about' then the scroll position will be not cut sharply at the top edge of the element with id='above'. Instead, Zenscroll automatically adds the configured edge offset (which is 9 pixels by default, unless you changed it).
No automatic adjustment happens in the following cases:
The scroll is also animated when the browser’s back and forward buttons or the relevant key combinations are used (or even if the navigation is invoked from JavaScript). Note that although Zenscroll remembers the vertical scroll position, it cannot calculate changes caused by browser window resizing or collapsing/expanding elements, etc.
This functionality requires browser support for history.scrollRestoration which is available for example in Chrome 46+, Firefox 46+, and Safari Technology Preview.
The automatic smooth-scroll on local links can also trigger the standard hashchange event and the CSS pseudo-class :target but only if you set the edge offset to 0. I had to introduce this limitation because otherwise the scrolling isn’t smooth.
So if you need hashchange or :target then make sure you execute zenscroll.setup(null, 0).
Zenscroll wants to be a lightweight solution for animated vertical scrolling, that works in most browsers. The automatic link-scrolling is even more focused on anchors that are directly inside the page body. Unfortunately it won’t scroll accurately to elements that are inside other scrollable elements (e.g., overflow: auto; max-height: 100px). Don’t expect Zenscroll to re-implement the full functionality of the browser, with the recursive logic of traversing the nested scrollable elements.
So, how to deal with a situation like this? Try one of the following methods:
The automatic smooth-scrolling is completely disabled in the following cases:
If you want only some of the links to be excluded from the automatic smoothing then do one of the following:
Note that Zenscroll intentionally leaves a few pixels (by default 9px) from the edges of the screen or scrolling container. If you have a fixed navigation bar or footer bar then you probably need more than that. Or you may want to set it to zero. You can globally override the default value by calling zenscroll.setup() (see below), or by providing the edgeOffset parameter when you create a scroller for a DIV, e.g., zenscroll.createScroller(myDiv, null, 20)
If the element is already fully visible, with the edge offset at the top and bottom, then no scroll is performed. Otherwise Zenscroll will try to make both top & bottom of element visible, if possible. If the element is higher than the visible viewport then it will simply scroll to the top of the element, including the edge offset.
Tip: If you resize an element with a transition of 500ms, you can postpone calling zenscroll with that amount of time:
If you want you can also define an offset. The top of the element will be upwards from the center of the screen by this amount of pixels. (By default offset is the half of the element’s height.)
Note that a zero value for offset is ignored. You can work around this by using zenscroll.toY().
The default duration is 999 which is ~1 second. The duration is automatically reduced for elements that are very close. You can specifically set the duration for each scroll function via an optional second parameter. If you pass a value of zero then the scroll happends immediately, without smoothing.
Examples:
Anything you can do within the document you can also do inside a scrollable DIV or other element. You just need to instantiate a new scroller for that element. I will also fall back by default to the native browser smooth-scrolling if available (which can be overridden via setup()).
Important: the container DIV must have its position CSS property set to relative, absolute or fixed. If you want to keep it in the normal document flow, just assign position: relative to it via a class or a style attribute, like in the example below:
Obviously you can use all other scroll functions and parameters with the scrollable container. Two more examples:
Cinemagraph pro 2 7 1. You can provide a callback function to all four scroll functions, which is executed when the scroll operation is finished. For example, you change some UI elements but first you want to make sure that the relevant elements are visible.
Note that the callback is immediately invoked if the native scroll-smoothing is enabled (see above).
If you look at the source code of the examples under Scroll inside a scrollable DIV they are actually implemented like this:
So first the container (with ITEM 1 to ITEM 7) is scrolled into view if necessary, and then the scrolling inside the container is performed. Try scrolling out the above container and then hit one of the ‘Play’ buttons above to see how it works.
This works with all four scrolling functions. The onDone parameter is always the last parameter:
It’s easy to change the basic parameters of scrolling:
You can change custom scrollers similarly:
Mypoint pro 1 17. If you don’t want to change a value just omit the parameter or pass null. For example, the line below sets the default duration, while leaving other settings unchanged:
Sets the the spacing between the edge of the screen (or a DIV) and the target element you are scrolling to, while leaving the default duration unchanged:
The function always returns the current values in an object, so even if no parameters are passed you can obtain the current settings:
To check whether a scroll is being performed right now:
To stop the current scrolling:
Cisdem datarecovery 6 2 0. To get the current vertical scrolling position:
To get the top position of an element within the body or a scroller:
Impotant: the returned value is without edge offset, and without recurcursively calculating nested scrollable containers.
Public Domain. You can do with it whatever you want and I am not responsible for anything.
My name is Gabor Lenard. You can find me on Twitter as @zengabor. I am a product designer & maker, currently building zenvite.com. It never ceases to amaze me how people share their knowledge and what they make. Their work empowers us all. This here, however humble, is my way of contributing to this community & the wonderful continuum we call the world wide web.
Other projects by me:
0 
Star